-
#### Issue
I started to work with this module and wanted to test graphics in the `NHD-2.7-12864WDW3-M` it's a 128x64 display and I did the following code to setup custom fonts and I found it here #2…
-
### Did you test the latest `bugfix-2.0.x` code?
Yes, and the problem still exists.
### Bug Description
Both default and X5SA (modded for pro) configurations fail compilation
bugfix 2.0.x download…
-
I am trying to run the loadFromSD demo sketch with an ESP8266 connected to as ST7920 LCD and an Sd card.
I have the display on pins D5 (CLK), D7 (MOSI) and D10 (CS) with the following constructor:
…
-
I just took a look over at the adagfx 1325 repo and there is already a pull request (adafruit/Adafruit_SSD1325_Library#1) to fix the include guard, but it's not been merged in some time, this PR is no…
-
I cannot compile the current Marlin 2.0.x branch for my SKR mini E3-DIP V1.1. I've tried on both Windows and Linux and switched back to the example config from Configurations-release-2.0.7.2 for this …
-
At https://github.com/adafruit/Adafruit_Python_PlatformDetect/pull/99 @makermelissa noted that
Adafruit_Python_PlatformDetect was hard coding a version of black, and removed it. I am assuming this…
-
### Bug Description
When I compile Marlin for SKR PRO V1.x board and use TEMP_SENSOR_0 set to -5, I can compile without a problem because in .vscode\c_cpp_properties.json file for SKR PRO V1.x boar…
-
I have 2560 mega Ramp 1.5 / 1.6 .. Anet a8 example configs.
I can compile and upload the 1.1.8 with Ramps 1.4efb motherboard. enabled ~define have tmc2130. Enabled one axis stepper only! NO TMC213…
-
Tried both from the Library Manager and cloned from GitHub; with the latter it looks like this:
```
/usr/share/avr/bin/avr-ld: /tmp/cct12l2x.ltrans0.ltrans.o: in function `NanoEngineInputs::ky40Bu…
-
When using a sh1106 the service won't start.