-
```
What steps will reproduce the problem?
1. power on the rc transmitter and copter.
2. Now there is osd overlay, but the data is not beeing updated. Everyting at 0.
3. Arm the copter. Data appears. …
-
Companion Computer: RPi 4B
Dronekit : 2.9.2
Dronekit sitl: 3.3.0
I received this two errors:
1) pi@raspberrypi:~ $ dronekit-sitl copter
os: linux, apm: copter, release: stable
SITL already D…
-
This ESC is not in the list of supported ESCs:
http://www.emaxmodel.com/esc/simonk-series/emax-simon-series-30a-for-muti-copter.html
Do you plan to support i in the future releases?
-
```
What steps will reproduce the problem?
1. agressive flight in stable or simple mode
2. you can also do it in ground - land with the trimmed copter but do not power
off engines. shake your copter …
-
```
What steps will reproduce the problem?
1. If I plug in the OSD and copter without a link to APM Planner 2.0
2.
3.
What is the expected output? What do you see instead?
I expect to see my loc…
-
```
What steps will reproduce the problem?
1. If I plug in the OSD and copter without a link to APM Planner 2.0
2.
3.
What is the expected output? What do you see instead?
I expect to see my loc…
-
```
What steps will reproduce the problem?
1. If I plug in the OSD and copter without a link to APM Planner 2.0
2.
3.
What is the expected output? What do you see instead?
I expect to see my loc…
-
## Bug report
**Issue details**
Copter slows down vertically when it approaches the landing target if a downward-facing rangefinder is configured. However, a rangefinder is only compulsory while u…
-
## Bug report
**Issue details**
Was flying my 5" quadcopter on omnibusf4pro, after few flights suddenly got this error when it was on the ground, i saw yellow LED flashing on GPS, when i connected…
-
## Bug report
**Issue details**
Not seeing MISSION_ITEM_REACHED message for MAV_CMD_NAV_LAND mission item. MAV_CMD_NAV_RETURN_TO_LAUNCH works as expected. Tested in SITL.
Looks similar to #7157.
…
l3s2d updated
2 years ago