-
#### Provide the steps to reproduce
1. Run LH on
#### What is the current behavior?
#### What is the expected behavior?
#### Environment Information
* Affected Channels:
…
-
Duplicates maybe appears on this list. "Forked" from [ryuuganime/animanga-wordlist](https://github.com/ryuuganime/animanga-wordlist)
- [ ] (Making of) Evangelion: Another Impact
- [ ] .hack//G.U. Re…
-
-Robot: waffle Pi
-SBC: Raspberry Pi 3
OS installed in SBC: Raspbian
OS installed in Remote PC: Ubuntu 16.04 LTS (Xenial Xerus)
ROS version: 1.12.14
Hello everyone,
Did anyone meet a problem…
-
Hello
I am trying to update to the last version, i have tried with both versions 1.1.9 and 2.0, and my probe does not stop at homing.
Z_min is below bed level and I use the z_probe as Z_homing.
…
-
I installed BLtouch on my homemade printer with Marlin 1.1.9 recently and it doesn't compensate the bed leveling. Before I installed BLtouch, the bed limit switch for Z axis seems to work perfectly wi…
-
1. do not insert sd card
2. slow lcd respond with 0.5 sec for each line refresh
3. insert sd card
4. it become normal operation
5. take out sd card again
6. slow lcd repsond again ...
Regards
…
-
### I need help on my 3d Printer, the bed size is 400,400 but i only try to use 330 by 300 but when i do the bilinear auto bed leveling it would say probing failed at the 7th probe, i tried reduci…
-
**Original report ([archived issue](https://osrf-migration.github.io/subt-gh-pages/#!/osrf/subt/issues/202)) by Martin Dlouhy (Bitbucket: [robotikacz](https://bitbucket.org/%7B27de76db-249c-44be-9eb8-…
-
i tried to Print Multi Coulor (E.G White Black Blue) Throu Singelnozzle Diamond Head. Butttt... My Firm is Changing different Temperature and all everything it have to do to Print other extruder but t…
-
Hello, the mainly config like below:
```cpp
#define Z_DUAL_STEPPER_DRIVERS
#if ENABLED(Z_DUAL_STEPPER_DRIVERS)
#define Z_DUAL_ENDSTOPS
#if ENABLED(Z_DUAL_ENDSTOPS)
#define Z2_USE_ENDSTOP…