-
Hi everyone,
thank you very much for this great tool.
As you know I am using it for SH-Inverters and it works great.
But know I need to work with an SG-Inverter (SG10RT). The WiNetS WebInterfaces…
-
Hi thomasfa18,
I'm wanting to write my own application in C#. I note that you mentioned that you had the official modbus map and was wanting to know if I could get a copy? In particular, I'm afte…
-
Hello! I use the solariot with Sungrow SH6-0RT inverter and mqtt. Inverter and raspberry are in the same LAN, mqtt server ist remote.
Works fine for some time, I can get messages from mqtt. Then th…
-
Thanks for the rewrite @bohdan-s! I just got around to trying it today. My config is as follows:
```
inverter:
host: sungrow.gateway
port: 8082 # Default for modbus is 502, for h…
-
model = "sungrow-sg5kd"
timeout = 60
scan_interval = 60
I've tried multiple time outs (60 is the most I've tried)
It is strange because if I restart the script it works every time
-
Hey,
Firstly thanks for this, been working on something like this personally but found yours on whirlpool.
The script seems to be working in some capacity but I don't think you directly support th…
-
Here is the official docs for the hybrid range:
[communication-protocol-of-residential-hybrid-inverterv1.0.20-1.pdf](https://github.com/bohdan-s/SunGather/files/7724948/communication-protocol-of-re…
-
I replaced all the secrets in the yaml file in order to make the setup easier. After all they are no secrets just an IP and a port number. I suggest you also do that and simplify the documentation acc…
-
Upon loading I get the error message "Please make sure mqtt.py exists in the exports folder"
I can confirm it exists. I've set up the config file with the correct IP for the MQTT server, unhashed t…
-
I had my inverter connected via Wi-Fi until I had time to run an ethernet cable to it. Switched it over to an ethernet connection and iCloudsolar etc continued to work without issue.
But solaroit.p…