-
Hi there!
I was looking for a topic like this, but I only found one at [nodemcu ](https://github.com/nodemcu/nodemcu-firmware/issues/1625)and found none at Arduino. If there is any, please point m…
-
The CN3801 is a simple solar MPPT (constant voltage, which is okay, but not optimal) LiFePO4 charger IC.
There is a nice little design based on this that does exactly what we need:
https://easye…
-
Great Project! :smiley:
Burning over-voltage with resistors is inefficient and causes heat problems.
It cannot help with under-voltage of cells.
About 1A balancing current is to low for C1 310Ah …
renne updated
2 years ago
-
I really appreciate you for your work!
I'm testing it on bms 8S, 24v 50A, and everything works fine, but only in one case - in case of discharge.
BMS stops responding and send any data by charging,…
-
Martin wants to race with a lightweight battery (half the acid weight)
safest lithium battery type
-
The power supply concept for Rosmo needs more attention.
The motors chosen are for 12V. They will run with less, but since they have quite high resistance the current, and hence the torque will be …
-
**nanoFramework area:** (PWM Library)
### Is your feature request related to a problem? Please describe.
### Describe the solution you'd like
Hi, I'm looking at controlling a half-bridge for D…
-
Quote " the alternator will surge, fry its diodes and destroy all connected equipment in the process. The other charge sources often exibit similar problems when the battery is suddenly disconnected. …
-
The following formula can be used to convert voltage into % remaining on an idle XR. It works with a CBXR, and so would work with a JWXR. I don't know how it would work with VNR.
99.…
biell updated
2 years ago
-
@sathya131295 started looking at the case for the ESC. https://github.com/rosmo-robo…
samuk updated
2 years ago