-
What voltage should be selected when ordering the ODrive 3.6?
Are there alternatives to this item? It's currently the most expensive piece of the entire project. Total cost is about $1500 USD for …
-
Hi
I have from aliexpress clone nodeMCU V3. But i can not programming it under arduino IDE
Szkic używa 243 785 bajtów z (23%) pamięci programu. Maksimum to 1 044 464 bajtów.
Globalne zmienne używają …
ghost updated
8 years ago
-
Hi,
I have built this project. All soldering is good and checked. I used a diode 1N4148 and a BC547 transistor. No pushbutton installed for the reset.
Pico programmed from USB and bin files copied…
-
Hello,
I used your 1.06 alpha on a usbasp clone some years ago, now i bought a new one like this: https://it.aliexpress.com/item/1pcs-FREE-SHIPPING-ST-Link-V2-stlink-mini-STM8STM32-STLINK-simulato…
-
Nozzle keeps crashin into bed. I calibrated it many times. M119 is triggering. But when i home all axis it always crashes. I do it with heated bed. Should i do it with cold bed?
Sensor worked a few …
-
Ive been on the fence for quite a while about building a couple of these because of some of the problems mentioned in the issue tracker (pcb incompatibilities, zero2 issues, software problems) but dec…
-
Here released Ubertooth Windows port: > https://github.com/sevstels/Ubertooth-Win
see menu point: > Ubertooth IAR & MSVS port for Windows
Many small bug`s was removed, also USB transfer bug fixe…
-
The (_Emergency_) Exit Doors in Braga will be used by people with reduced mobility,
_specifically_ people who are **wheelchair-bound** and may have difficulty opening the door(s).
The _proposed_ E…
-
### Printer model
MK3S/+
### MMU model
MMU2S
### Firmware versions
3.14.0
### Upgrades and modifications
Prusa MMU2S Rear PTFE Holder (https://www.printables.com/model/22339-prusa…
-
Does this library support a panel with a resolution of 160x80 pixels? When I run the demo, it displays a message indicating a limitation regarding the number of pixels.
Product: https://de.aliexpre…