-
This issue will focus on making two updates on the ISO13790 package:
- The `ISO13790.Validation.BESTEST` package will be updated by using the recent results from ANSI/ASHRAE Standard 140-2020. Curr…
-
SPs refer to the CAZ Depressurization Remediation Guidance when entering data for ASHRAE and how that may have an affect on the appliance.
https://mn.gov/commerce-stat/pdfs/combustion-appliance-zo…
-
Robust indoor ventilation should comply with ASHRAE 241's infection mitigation management mode's level of clean air supply, which is NN liters per second per person, with NN depending on the setting.
-
Cooprop Ver 6.6
Windows 11 ,Excel 2016
I compared the differences in the calculations ,As shown in the figure
![error](https://github.com/CoolProp/CoolProp/assets/8532202/73e757f5-45d8-42e5…
-
This started out for me as a hassle in a peer review process, but I am increasingly starting to admire [ASHRAE's Commercialism Policy](https://www.ashrae.org/File%20Library/Conferences/Speaker%20Resou…
-
- [ ] double check the PID controller activing behavior. In RP-1711, `direct acting` means when measured value increase, the PID controller output should increase. In current PID control, `direct acti…
-
From the draft findings document, page 4:
> 2.4. Remove customers with daily baseline CVRMSE values in excess of 1.0.
I understand that CVRMSE is an indication of the quality of the model fit, and…
-
For s223 models, connection points at different levels of containment that correspond to each other use the s223:mapsTo relation. The mapsTo relation goes from the connection point on the contained eq…
-
```
Supriya,
Title 24 does not have a water main schedule for every possible weather file.
Currently there are 16 Title 24 water main temperature schedules (one for each
climate zone) and each is …
-
Hi,
Firstly, thanks for this well written and concise library - I'm attempting to simulate adiabatic cooling of air and have found this to be very helpful!
I noticed a small bug when iterating t…