-
Hello. Just got my new Tang Primer 20K, verified it is working with Gowin programmer on windows. Unfortunately with openFpgaLoader I am facing an issue consistently. The flashing is stopping at ~48% a…
-
Hi
I have with success programed my tang nano with your tool, both:
openFPGALoader -m -b tangnano impl/pnr/*.fs
and
openFPGALoader -m -b littleBee impl/pnr/*.fs
Give a successful …
-
I am running Homey Pro Early 2023, version 12.02 with app version 0.029. I have the device to test as well
Thank you in advance.
"ids": {
"modelId": "CK-BL702-MSW-01(7010)",
"man…
-
I tried to drive 1Mbps uart to the BL702, but I see incorrect data. I can drive the same uart data to a board pin and look at with my logic analyzer (pulseview) and it looks fine. My Tang Nano 1k boar…
-
I'm collecting info about the Coordinator and Repeater mode for the builtin Zigbee module.
My NSPanel Pro was root activated since version v1.5.6. To switch between the two modes you need v2.2.0 or…
-
调试板为 rv-debugger-plus,目标机器是sipeed nano,编译出来发现jtag能用,但是uart无通信。起初怀疑硬件的问题,但对比烧录sdk example下的usb2uart用例,uart通信正常,所以认定是固件bug,请排查一下。
-
Hi,
My goal here is to use edge impulse FOMO and get the count of objects on Wio Terminal. In order to do that, I was following this [link ](https://docs.edgeimpulse.com/docs/development-platforms/of…
-
### Link
https://fr.aliexpress.com/item/1005003241784242.html
### Database entry
{"id":17,"type":"Router","ieeeAddr":"0xb4e84286708e0000","nwkAddr":53643,"manufId":4742,"manufName":"eWeLink",…
-
```
"integration_manifest": {
"domain": "sonoff",
"name": "Sonoff",
"codeowners": [
"AlexxIT"
],
"config_flow": true,
"dependencies": [
"http",
"zer…
-
### What happened?
All of my lights have strange behavior or do not respond only after a restart works for a while and the same behavior happen again, also they go offline. I have about 90 devices mo…