-
Arduino hardware: 1.18.19
OXIMETER ARDUINO UNO
VIN 5V
GND GND
SCL SCL
SDA SDA
But in the Serial Monitor is "Ini…
-
### Troubleshooting checklist
- [x] I read the README (on master) thoroughly
- [x] I ran the MAX30100_Tester and I'm going to paste the output down below
- [x] I filled in all the details of my s…
-
### Troubleshooting checklist
- [# ] I read the README (on master) thoroughly
- [ #] I ran the MAX30100_Tester and I'm going to paste the output down below
- [ #] I filled in all the details of m…
-
I used two esp8266 one for server one for client , I try to send the value of Max30100 but it always 0
[新文字文件 (2).txt](https://github.com/oxullo/Arduino-MAX30100/files/3455206/2.txt)
-
i have an issue with the example code,
the program is error when compiled and it said could not convert 'sensor.MAX30100::begin()' from 'void' to 'bool'
is there any solution for this issue ? thank…
-
I am using MAX30100 to post BPM and SpO2 to my server using Http Post request and Node MCU the code is compiling with no errors but Iam getting 0.00 value or posting only one value all the time and v…
-
I have the following sensors available for testing in my lab
Esp32 dual and single core
Esp8266
GPS NEO-M8 series
Diavolino
Hc06
Bluetooth BEE WLS125E1P
RFM12B
RFM22
IR940NM 850NM
HALL SE…
-
Is 93% the lowest it can go ? Where and what to change if we want to detect lower values as well ?
I was able to run MAX30100 sensor with Arduino Uno properly. Verified my readings with a medical g…
-
Hi,
can you help me with GY-MAX30102 sensor it is same board of MAX30100 but with MAX30102 sensor,
i try to use your library on Nodemcu 12E, where i connect SDA and SCL to default pins,
but i could…
-
@oxullo
Connections :
Vin => arduino 3. 3v
Scl => ardunio Scl
Sda=>ardunio sda
Int=> ardunio pin 2
Gnd=> arduino gnd
_Originally posted by @mesutsaygioglu in https://github.com/oxullo/Ard…