-
### Description
Setting variables on a running Linux kernel (`6.5.7`) that is being debugged with `kgdb`, `pwndbg` and QEMU doesn't work, even if it does on common gdb.
### Steps to reproduc…
-
I'm unable to connect with the example (code as of today, after the fix made in #39 that was reported in #38 as connection issues).
I have the correct IP/Serial/Access Code, I'm not on lan-only mode…
-
Great work much appreciated.
----->>>>>comming to my issue I was able to flash this project
https://github.com/martin-ger/esp32_nat_router/blob/master/main/esp32_nat_router.c
---->>>> but your…
-
## Checklist:
1. 查找[历史相关issue](https://github.com/PaddlePaddle/PaddleX/issues)寻求解答
2. 翻阅[FAQ常见问题汇总和答疑](https://github.com/PaddlePaddle/PaddleX/blob/develop/docs/FAQ/FAQ.md)
3. 确认bug是否在新版本里还未修复
4…
-
**Describe the bug**
There is a probability that serial column was not detected.
This can happen when the table is referenced by another table.
**Expected behavior**
The result of autogererate s…
-
Hi. i m trying to connect to Rot2prog controller but I'm getting this error after running python -m rot2prog.utils.run:
python -m rot2prog.utils.run
Please enter the serial port: COM1
DEBUG:rot2p…
-
**Describe the bug**
Try following basic install on windows from the ground up.
Install the latest python, latest VS code, the latest circuitpython extension.
Select python interpreter and restart…
-
- Arduino board: Adafruit MagTag (black silkscreen)
- Arduino IDE version (found in Arduino -> About Arduino menu): 2.2.3
- List the steps to reproduce the problem below (if possible attach a …
-
Sometimes the MyCobot280pi stopps working.
With this testscript it shows me, that there are Errors. Why.
The only solution is to power it off and on with the switch.
```
from pymycobot import My…
-
Hi Folks
I'm using Voltcraft DLP 3306 power supply which is connected to the PC via USB.
I see from device manager "USB Test and Measurement Device (IVI)" is displayed (please see screenshot for ref…