-
**Describe the bug**
I have been using the i2c-rtc overlay with an ab1805 RTC ("dtoverlay=i2c-rtc,abx80x"), after upgrading the kernel from 4.14 (raspberrypi-kernel=1.20190401-1) to 4.19 (raspberrypi…
-
I am trying to use pfc8583 . Board is STM32. It always hangs on setMode function..
Sample code:
uint16_t PCF8583::setMode(uint8_t address,uint8_t mode)
{
_address = address >> 1;
//…
-
There seems to be something wrong with the way the Thingy 2.1.0 firmware manages CCS811 calibration.
I've set up several Thingies next to each other in a interior space several meters from a forced…
-
Hello,
I am relatively new contributor, and I am looking to add support for the SHT4X temperature and humidity sensor. I have a branch that is a work in progress here: https://github.com/linguini1/…
-
Hi,
I'm wondering what do You think of adding HTU21D sensor to Your plugin?
I know it was mentioned earlier issues... And You sad that You dont have this sensor...
Ok the point... Looking at the…
-
### Describe the bug
### OpenWrt version
r28064-64fbc96595
### OpenWrt release
SNAPSHOT
…
-
We need to have a C# file that is able to correctly mimic the behavior of the SHT30 temperature/humidity sensor [(Link to Datasheet here)](https://www.mouser.com/datasheet/2/682/Sensirion_Humidity_Sen…
-
We need to have a C# file that is able to correctly mimic the behavior of the LSM6DSO IMU [(Link to Datasheet here)](https://www.st.com/en/mems-and-sensors/lsm6dso.html). This needs to utilize the Ren…
-
When trying build for the pi, the build fails with this output:
`make ARCH=arm CROSS_COMPILE= -C /lib/modules/3.13.0-24-generic/build M=/home`
`/path/to/rtl8812au modules`
`make[1]: Entering direc…
-
### Describe the bug
my first build of the 6.6 series gives some issues, mostly minor, but I thought this one would be interesting:
```
[ 16.685075] crypto-safexcel 15600000.crypto: can't request…