-
## Issue Description ##
HI srsRAN development team,
I have already looked at the srsRAN users mailing list and noted that another [user](https://lists.srsran.com/pipermail/srsran-users/2023-Ma…
-
-
## Issue Description ##
I am trying to establish an end-to-end 4G network and my UE cannot attach to eNB. I am using the default configuration files and I could not find what is the cause of th…
-
Hello, recently purchased an ANTADR E200 and have been facing issues with establishing a communication between the SDR and the host computer. We have successfully built the host UHD firmware on the ho…
-
## Issue Description ##
I have a doubt if we could run srsRAN UE on a Raspberry Pi 4 while the EPC and ENB are running on another Raspberry Pi 4.
## Setup Details ##
[Specify details of the t…
-
## Issue Description ##
I am trying to establish end-to-end 4G network and I have encountered an issue with SFN synchronization running the UE. After the message that SFN is not yet synchronized I …
-
Hello.
I have installed srsRAN_4G in two machines In one machine I run srsepc (192.168.75.185) and in others I run srsenb and srsepc.
eNB connection to EPC is ok. srsue is also connected to eNB, bu…
-
## Issue Description ##
We are using the 5G NSA deployment, the problem is that the network is undetectable by UE's, when we remove the NR cell from the rr.conf file and basically run an LTE depl…
-
Hi,
I've noticed that when calling `usrp->get_tx_rates();` in the application using the E200 UHD is not returning correct ranges. Interestingly, the `get_rx_rates()` API does seem to work fine.
``…
-
Config looks like this
```
cmake -C /var/tmp/portage/net-wireless/srsran-22.04/work/srsran-22.04_build/gentoo_common_config.cmake -G Ninja -DCMAKE_INSTALL_PREFIX=/usr -DENABLE_UHD=yes -DENABLE_BLADE…