-
Would someone please be so kind and implement the decoding of byte 118 in heishamon.
Byte 118 decrypt:
Inlet Water Temperature [°C]
1st, 2nd & 3rd bit
.00 b001
.25 b010
.50 b011
.75 b100
…
-
Hi.
The integration is not showing up in the hacs integrations store.
Am i doing something wrong ?
-
Can i just add a second Aquarea heat pump with its own heishamon board? How to distinguish between them?
-
Hi,
for me enabling Softstart leads to a heavy on-off behaviour. See attached screenshot.
Before 7:30 heatpump was off and after 9:30 softstart was deactivated.
Not sure if a bug or wrong setting…
-
Version 22.26 Beta
Solar function seems more stable and trigger at moment threshold power meter value is detected, all seems to be ok.
When trigger the DWH setpoint is set to DHW temperature setpoi…
-
Hi,
first of all - great work! In my case not all entities show up the autogen dashboard, e.g. quiet mode switch or compressor frequency. I can however add them manually to my dashboards. Is that o…
-
Hi,
Have some issues with heishamon not / very slowy responding for a couple fo minutes / hours. It just happens from time to time and alos MQTT comannds not working anymore. Wifi is stable (78%)…
-
When enabling monitoring on the Panasonic Service Cloud, the heatpump's inlet and outlet temperatures are displayed as fractional degrees with a resolution of 0.25°C. The downloadable CSV files also h…
-
https://github.com/kamaradclimber/heishamon-homeassistant/blob/17e568b6d326f2e206ecc5c8ef4adc69abfa2b79/custom_components/aquarea/climate.py#L157-L172
For the 3 mode, I think would be best to switc…
-
Is there any chance including Command Topic "Outlet Water Target Temperature? This would allow a direct control of water heating temperature when heating/cooling curves are disabled.