-
### Operating System
Windows 10
### IDE version
Arduino 1.8.19
### Board
Feather nRF52832
### BSP version
1.3.0
### Sketch
Example: Bluefruit52Lib/examples/peripheral/blinky_ota
File to upda…
-
* **Device**: WhiteFox TrueFox (2017)
* **Firmware Origin**: web configurator,
* **OS**: macOS 10.12.3
* **Version**:
* **Reproduction Steps**:
1. Download [this mapping](http…
-
DFU mode restore of iPhone 8 fails
```$ sudo ./idevicerestore -e -l
NOTE: using cached version data
Found device in DFU mode
Identified device as d201ap, iPhone10,4
Latest firmware is iPhone10,…
-
My monster8 v2 starts burning on the marked piece after holding the boot button while the board is off and turning it on with the button pressed. I'm trying to add marlin binary file transfer via octo…
-
```
I followed all the steps and ran the windows batch file. My output was this:
Abracadabra!
C:\Users\adam\Downloads\UnoJoyWin-15May2012\UnoJoyWin\ATmega8u2Code\HexFiles>bat
chisp -device at90usb82…
-
Hi,
I tried to change the hacker version to a secure version and followed this guide:
https://docs.solokeys.io/programming/
Here is the output I got. How should I continue?
```
c:\Temp>solo …
-
Samsung SM-T580, Android 8.1
micro:bit app 2.8.8
micro:bit V1.5, USB flashed from MakeCode.
Fresh start: reinstalled the app, removed pairings in Settings/Connections/Bluetooth, and USB flashed m…
-
I ordered several boards of this variant from JLCPCB. And, they used a STM32F072C8T6 [C80488](https://www.lcsc.com/product-detail/ST-Microelectronics_STMicroelectronics_STM32F072C8T6_STM32F072C8T6_C8…
-
As there is to my knowledge not an available DFU bootloader on esp for no_std applications, I've been attempting to implement `embassy-boot` for ESP architectures, attempting to copy the layout of the…
-
I compiled the project on both macOS and ArchLinux, but could not flash successfully. The device could be discovered successfully. However, I am getting error on `get_status` after downloading consist…