-
At first, thanks for all the effort that went into this project.
By now it is quiet impressive and led animations (ws2811, orange pi zero) are flicker-free and without noticeable latency.
It too…
-
This is a follow-up for #103
- [x] lib-artnet -> https://github.com/vanvught/rpidmx512/blob/master/lib-artnet/src/artnetparams.cpp
- [x] lib-artnet -> https://github.com/vanvught/rpidmx512/blob/m…
-
Integrate DMX setup to Openhabian
```
introtext="This will install and setup DMX binding on your RPI , this binding uses the Open Ligthning Project(http://opendmx.net/index.php/) to communicate be…
-
Hey fairly new to this, planning a project.
From what I understand once this is installed I don't need to leave a pc/mac open to run this right?
As in after initial setup? or does there need to be…
-
Hi, after tried everything possible with Matthew Tong and Robert Oostenveld I tried with yours, as the problem I'm probably facing with their releases is the jitter problem, the signal outputs but fix…
-
First time I've needed DMX from the Falcon PiCap (for another person's project).
FPP v2.4.2 working perfectly in Tether Mode for this project.
Didn't try Master since there was no Internet connect…
-
Hi!
I use a ESP01 module 1MB.
I have tried different builds:
WLED_0.9.0-b1_ESP8266_1M_full.bin
WLED_0.8.6_ESP01_1m_full.bin
WLED_0.8.6_ESP01_512k.bin
Transfered with esptool, result:
----…
-
Hello!
First, the soft seems nice, but I cannot see any of my network interfaces in a DMX module with artnet.
I'm running macos mojave (hackintosh), and I can see my usb c ethernet adapter and s…
-
Sorry, i'm running `./build_h3-firmware.sh` on a fresh pull,
compilation is completing...
```
[../rpi_wifi_osc_dmx]
PLATFORM=ORANGE_PI_ONE NO_EXT_LED=1
Skipping...
/home/hip/OrangePi/tes…
-
Hi, I'm spending some hours to installa the board on IDE, libraries, and trying to figure out what is wrong. I've update everthing to try to fix it but nothins, I've Core file s installed but I overwr…