-
The current D5 V2 PCB has an issue where any jumper powers all nodes. This should be corrected.
I have not personally found the all-nodes jumper to be an issue when reflashing. Should there still b…
-
The shunt_resistance of 0.1Ohm will not output the correct power. The value of 0.001Ohm will
correct it but the physical resistor is still R100 also 0.1Ohm.
sensor:
- platform: ina219
add…
-
Per request from @DoubleDutch1962 on Slack.
-
Taras sent in the following:
Hi there. I used your library for INA226. Found an error. In the example DisplayReadings.ino
power is not calculated correctly. I add a screen.
V = 8,843 V
A = 35.73…
-
Node.js用のexampleを作成しnode-examplesフォルダに追加する。動作確認も。
- [x] @chirimen/ads1015@1.0.1-alpha.1 #8 にて対応
- [x] @chirimen/ads1x15@1.0.0-alpha.1
- [x] @chirimen/adt7410@1.0.1-alpha.0 #8 にて対応
- [x] @chirime…
-
Hi Alex,
I am in process of designing new PCB for home automation using Raspberry Pi Zero.I need your help in identifying proper pins for following hardware:
- I2C Bus for temperature, humidity,…
-
提供されているサンプルコード https://r.chirimen.org/examples と同等のコードをESモジュール化したものに変更し本リポジトリ [/examples](http://chirimen.org/chirimen-drivers/examples/) に加える
CHIRIMEN上のブラウザーで動作確認を行う
- [x] @chirimen/ads1015@1.0…
-
Hi, I am using this code with your library and get the error: ImportError: cannot import name INA219
```
#!/usr/bin/env python
import socket, time, math, csv, datetime, subprocess, sys, os
…
-
When we have a lot of classes and race data, it takes a very long time to get 'results' generated. Usually the very first time you 'generate' after a change the system will not display the result at a…
-
hw: hardware: WROVER + I2S DAC
fw: bleeding.edge.69-I2S-4MFlash
config:
```
sent config JSON with data: {"timestamp":1593187540065,"config":{"a2dp_ctmt":{"value":"1000","type":33},"a2dp_ctrld":{"v…