-
The resulting configuration of the INA219 is not what it seems to be:
https://github.com/thomastech/Sparky/blob/9c30f25622108ede3e594dfe7e055e36fbda316d/src/PulseWelder/src/measure.cpp#L62
gener…
-
Thanks for the nice library. I'm looking to make my own battery monitoring system for our sailboat. What better library to use than the SV Zanshin library?
It would appear that this library was w…
-
~@chirimen/vl53l1x を用いるとき node.js やブラウザーのuse strict; するとエラーが発生して利用できない問題があるので直す~
@chirimen/vl53l1xだけでなく、ほかにも問題あるので直す
対応必要なパッケージ
- [x] @chirimen/ads1015
- https://github.com/chirimen-oh/chi…
-
I have a wemos d1 mini using tasmota-sensors.bin with a INA219 board connected. The sensor is recognized and outputs voltage, amps and power but the amperage is incorrect. I should be getting 1.07 a…
-
### PROBLEM DESCRIPTION
_A clear and concise description of what the problem is._
I'm using the precompiled ESP32WEBCAM Image. I connected two MG90s servos to GPIO14 and 15. I can control the se…
-
Hi,
With IDE arduino, select Mega 2560 as board . Compilation error :
Arduino : 1.8.9 (Windows 10), Carte : "Arduino/Genuino Mega or Mega 2560, ATmega2560 (Mega 2560)"
---
D:\ArduinoINA219-maste…
-
I'm test driving an INA219 I2C current sensor. The I2CDriver board sees the device at address x40, but the `read` and `write` buttons are initially disabled.
This…
-
Ref MASTER download issue found downloaded on Jan 18, 2020
I know this is in BETA, I have been testing the installation of an LED panel, I don`t have the panel yet and just using LEDs I have for no…
-
Hi Larry,
I've come up against a roadblock trying to use your library - neither the BitBang nor the MultiBang libraries work with my hardware and I'm unable to understand why.
The board is a "…