-
I have a dynamixel XL430-W250 and ran into issues compiling this package (branch: XL). Is this expected or is that branch tested with the appropriate dynamixels?
-
TL;DR add ServoImplEx to a FTClib servo class
My team recently built a coaxial swerve robot that uses GoBILDA 5 Turn Superspeed servos for rotating the wheels, these servos need signals between 500 a…
-
Would it be possible to add a function to receive midi CC also ? (to control led, servos etc )
thanks!
-
```
Allowing individual subtrims for each servo per flight mode.
I would propose one general subtrim per servo. Plus optionally a delta on that
for each flight mode.
Bertrand has worked on something…
-
```
Allowing individual subtrims for each servo per flight mode.
I would propose one general subtrim per servo. Plus optionally a delta on that
for each flight mode.
Bertrand has worked on something…
-
```
Allowing individual subtrims for each servo per flight mode.
I would propose one general subtrim per servo. Plus optionally a delta on that
for each flight mode.
Bertrand has worked on something…
-
I'd like to run 2 different servos each controlled by a different section of PID code. How do I do this?
-
Hi
Something is wrong here.
I'm trying to sync 2 engines rpm with ESP32 (v2.0.17). Futaba T32MZ and R7008SB, only receiving channels and slots.
The display in the logg comes from Serial.prin…
-
The telemetry from RX back to radio has a limited amount of bandwidth.
If you use something like an RB35S and add a few other sensors such as GPS, Pitot, FAS you quickly run out of bandwidth.
Th…
-
It looks like the Servo library is not compatible with Arduino Portenta H7 board yet.
I got these errors when compiling the code:
```text
\Arduino\libraries\Servo\src\mbed\Servo.cpp: In member …