-
Could there be an option to not ADD new waypoints in Harrier ( now it goes: add waypoint->77->that creates realistically next waypoint) but EDIT/OVERRIDE them in order?
It make a lot of confusion in …
-
Go to Stream Deck, open layer ```UFC_Actions``` and change the DCS-BIOS action for a button from ```TOGGLE``` to ```SET_STATE```. Click OK and ```Accept Changes```.
The image is lost and it shows ``…
-
# HELP US TO HELP YOU
## Change the title text to something relevant and follow the instructions below.
If you are having problems installing / configuring / using a profile then you should use th…
-
LED status from the AH-64D and F-15E have been intermittent. I have noticed this while using the "Master Caution/Warning" lights in both pits. The LED status in DCS-BIOS will not stay "TRUE" when the …
-
- [x] I have read [Getting Help](https://github.com/HeliosVirtualCockpit/Helios/wiki/Get-Help)
---
### Describe the Helios Issue
Using v1.6.602 (the latest right now) I'm trying to rotate my left…
-
Good evening,
Thanks so much for the quick addition of the F-15E.
The solution for having Line N present the main characters and Line N (special characters) present the dot, apostrophe, or colon…
-
### Summary:
There are problems with the design of the "INNER SPACER PLATE":
-The holes for the "OH1A8A1-101 - UFC COMM BEZEL" brackets are not present on the left side.
-Impossible to lase…
-
I get the point that you would like only a pointer (e.g. headset-to-hand are the only two points on the vector). But since this is now the simplest to use guest2 hands-to-dcs option. Can you give us o…
-
### Summary:
The UFC Spacer is missing the cutouts on the COMM1 display to allow the COMM1 bezzle to sit correctly and the COMM1 display to CLR Key should not have a cutout. the LCR will not sit and…
-
[24.08.2023 12:09:22] jasiu-rozowyczlowiek:
[24.08.2023 12:09:22] jasiu-rozowyczlowiek