-
When running the project pair `ex_03a_tx_wait_resp` and `ex_03b_rx_send_resp`, the response data is received by tx-side as expected, e.g. no data corruption of frame. In other words, this pair of pro…
-
I would like to test the TDOA application, in the process of using mynewt-dw1000-apps\apps\twr_tag_nranges_tdma example, the configuration of tag at compile time is as follows:
Newt target amend tag …
-
### Step 1: What do you want?
* Improve code (and need help).
### Step 2: Describe your environment
* Arduino IDE version or Toolchain: Arduino IDE 1.8.13
* dw1000ng Library version:…
-
Did you consider implementing a GPS like protocol for the DWM1000?
This requires:
* Synchronizing the timestamps of all devices;
* Each anchor send its position and current timestamp;
* From the…
-
**Describe the bug**
The thread analyzer feature is disabled for posix arch targets.
But this newly introduced test for this feature only filtered out native_sim, while there is more platforms based…
-
Board used: DW1001
After working for a while in a real environment, I wanted to higher the preamble and lower the data rate for longer distances and be able to extend the NLOS situation (as stated …
-
Measured position data can be extracted in two a few ways:
* UART over USB: After establishing a connection via `minicom -D /dev/ttyACM0 -b 115200`, pressing enter twice we get a CLI. Entering `lep…
tmplt updated
3 years ago
-
Hi all
I started to work with arduino+DW1000
I tryed examples, researshed DW1000.cpp library, and implemented few simple ideas.
Now I want to try frame filtering. I read user manual, ASP10 an…
-
-
Hello everyone,
I achieve to make Pro Mini 3.3V boards communicate and ranging between them quite easily. But I am facing an issue to do the same with Teensy 3.2 boards (which are also 3.3V).
I …