-
I'm interested in using the bl602 as a driver for the dwm1000 ultra wideband transceiver. However I don't think it makes sense to create a rust driver based on a hardware abstraction layer which isn't…
-
系统里面好像没有进行多标签处理?如果添加多个标签的话,需要如何处理呢?
-
I am facing some problems while using the library with Arduino M0 Pro (ATMEL SAMD21G)
* Arduino IDE version or Toolchain: 1.8.0 (went back to an older version to be sure that the problem is not b…
4KARA updated
3 years ago
-
I've purchased and mounted two dwm1000 modules onto breakout boards which I have wired up to some raspberry pi picos as a first test for an indoor positioning system I'm working on. I was able to get …
-
Hello
I am looking to create a arduino with 3 tags as ilustrated below.
i want it to be "self" calibrating using A1 as x=0 y=0 and i want to leasure distance A1A2 and distance A1 A3 and distance A…
-
Board used: DW1001
After working for a while in a real environment, I wanted to higher the preamble and lower the data rate for longer distances and be able to extend the NLOS situation (as stated …
-
Hello, sorry I am very new to this. I just got two https://www.makerfabs.com/esp32-uwb-dw3000.html from makerfabs. I try to use the example code provided on https://github.com/Makerfabs/Makerfabs-ESP3…
-
Basic Sender and Receiver seems working on my Arduino.
![image](https://github.com/thotro/arduino-dw1000/assets/135018753/a790ebfc-2998-41ec-863c-c6b86c77e1a1)
But, When I upload DW1000Ranging_A…
-
Using the DW1000 Anchor and Tag code, I am only getting ranges from 3 anchor even though 4 anchors are connected.
Furthermore does anyone know how to send these ranges data to MATLAB so I can do T…
-
Hi, I am using dw1000 ic with Arduino pro mini.installing 2 tags and 4 anchors give the following disrupted range.
![dr](https://user-images.githubusercontent.com/47691342/60796777-b6264c00-a18b-11e9…