-
Edit: seems to be an error in the esp32 arduino framework, see below
## Environment
Chipset: eps32
Board: heltec_wifi_kit_32
Iotwebconf: 3.0.1
Compiler: PlatformIO 5.1.1
Partition: min_spiff…
-
When reading a 320x240 bitmap image on an ESP32 (just reading, not writing it over Serial to my computer), it takes a long time, around 2 seconds. I’m guessing this is the limitations of sending the i…
-
Hello! That's fantastic! I was truly impressed when I saw your project. It inspired me so much that I ended up ordering 16 esp-01s. I have a couple of ideas. Initially, I attempted to find the radiati…
-
I was trying to run the Deep Sleep function of the ESP8266 to save energy between GPS readings. The problem is that according to Espressif specifications pin GPIO16 of the ESP should be tied to RST pi…
-
After some debugging, i found out that my NTP Server sometimes fails to respond and hence due to my program design, ezTime blocks my EPS8266 for 20 seconds according to NTP_RETRY.
Heres my outli…
-
Hi All,
Did any one managed to get the 15 Channel Dooya 2702 RF remote working with this library (https://www.aliexpress.com/i/32917187487.html)? I have the device in house, but it does not seem t…
-
I was measured 4.81mbps for the following code:
void shiftOutFast(byte data)
{
byte i = 8;
do{
GPIO_REG_WRITE(GPIO_OUT_W1TC_ADDRESS, 1
-
/arduino/libraries/Brzo_I2C/brzo_i2c.c: In function 'brzo_i2c_write':
/arduino/libraries/Brzo_I2C/brzo_i2c.c:72:2: error: cannot find a register in class 'RL_REGS' while reloading 'asm'
72 | asm…
-
### Checklist
- [ ] The title of this issue is "to the point" and descriptive.
- [x] This issue describes what is happening.
- [ ] This issue describes what components are affected (e.g. name of pl…
-
# Bug report
## Describe the bug
Wanted to use my Awtrix with EspHoMaTriXv2, but the esp crashes on boot with or without the connected awtrix.
I've tried different settings in the yml file,…