-
1:请问这个代码测量的心率准确吗?
2:i2c的scl_rate必须是400K吗 ?如果我不写framework层的代码(不改安卓源码),怎么设置i2c的scl_rate?
-
Since your primary concern is the oxygenation of the patients blood, couldn't you use a solenoid valve on an oxygen tank, which would be controlled by a blood oxygen sensor like the max30100 or max301…
-
### 議論したいトピック
心拍データの更新レートについて
### 現在の状態
https://twitter.com/kirimine170/status/1754034001285939343/video/1
↑で示した動画では、心拍の取得レートを100ms毎としているものの、そもそも心拍データの計算がライブラリの都合上、脈(beat)を検出する毎にしか更新されないっぽい。
#1…
-
Please help me, i should finish this project as soon
I want to make project monitoring using ESP8266, MQTT, and Node-RED dashboard
but I have an issue that my serial monitors showing cannot connecte…
-
@proyectoTEOS
Maxso100 uses asynchronous call back and pox.update() must be called as soon as possible
I too work with many sensors and I too faced the same software reset problem
So to avoid it I…
-
### 議論したいトピック
心拍数の計算について
### 現在の状態
https://github.com/oxullo/Arduino-MAX30100/blob/master/src/MAX30100_BeatDetector.cpp
このライブラリを使ってる(GPL感染中)けど、コードを見る限り、閾値を超えたデータを毎回beatとして記録して、前回のbeatと今回のbeatの時間…
-
### 提案・追加する機能の詳細"
## 目的
心拍の更新レートがonBeatなので、もっと高い更新レートにしたい
また、CorBiCoreの方でFFTとかで実装する時の参考にしたい
## 動作
センサのIR, REDの両方がいい感じに取れるらしいので、お試しで取得してみる
## その他
von Issue #11
## スクリーンショット、スケッチなど
…
-
### Troubleshooting checklist
- [ /] I read the README (on master) thoroughly
- [ /] I ran the MAX30100_Tester and I'm going to paste the output down below
- [/ ] I filled in all the details of m…
-
### 議論したいトピック
MAX30100ライブラリのライセンスについて
### 現在の状態
該当の[ライブラリ](https://github.com/oxullo/Arduino-MAX30100/tree/master)がGPL3.0なので、C++で普通に利用するとGPL感染必須
### 発議者の意見
## 背景
## 立場
コードの著者、プロジェクトの責任者とし…
-
Hi i wrote a simpel code to check is it work or not. when m=max30102.MAX30102(), it prints (Channel = 1 , Address 87)
and stucks in red, ir = m.read_sequential part.
I checked in i2cdetect -y 1 , …