-
**Describe the bug**
Problem enabling DPI mode on RPi3B
**To reproduce**
List the steps required to reproduce the issue.
Enable DPI with this in config.txt
[pi4]
##Enable DRM VC4 V3D drive…
-
While testing a sd-card less network boot of Pi3 and Pi3B+ again, I noticed that `config.txt` seems to be ignored.
All files are loaded, but all entries in config.txt have not effect.
For example…
-
**Is this the right place for my bug report?**
My issue is the same as #2482 or #2449
I am using Fedora 31 with kernel 5.4.7 (5.4.7-200.fc31.aarch64) running aarch64.
**Describe the bug**
when …
-
We have ARM and ARM64 (#1305) arriving on RPi3B+ and LePotato boards. We should try and see if we can get GPU acceleration there:
- OpenCL can work not too bad on Intel GPUs (cf `ccpp`) using Comput…
-
Some stange behavior...
After writing image to USB SSD (KingDian S280-120) and booting I can't see anything on my TV.
HDMI cable didn't unplugged, only booting media was switched.
After restoring m…
-
**Issue:** RPi3B+ plugged into a YAMAHA HTR-2071 home theatre system, going to a LG 65UM7510PLA 65-Inch UHD 4K HDR Smart LED TV. Version v31 works with no issues. However, v32 (and latest beta) do not…
-
## Platform
I’m using:
* gokrazy/rpi3b
* gokrazy/rpi3b+
* gokrazy/rpi4b
* ... and also gokrazy/rpi400
## Observed behavior
The Raspberry Pi 400 seems to mostly work. Everything except w…
-
Hi,
the "Quick start" image recommended on http://jasperproject.github.io/documentation/installation/ does not work with an RPi**3**b (the Pi does not boot at all). It _does_ work with a RPi**1**b …
-
I have a FreeBSD image on an USB stick. I can setup a VM with UEFI mode enabled and attached the USB as a SATA physical disk to the VM and it boots up just fine. However, With pftf/RPi3B+ burnt to an …
-
Hi, I just wanted to share the results of my customized cheap acrylic case and custom heatsinks that I used on my Raspberry Pi 3B+
On the top side I have the biggest heatsink that I could find that…