-
##### Expected Behavior
Using Edit->Options->Rebuild should build plutosdr backend
##### Actual Behavior
The plutosdr backend is not built, console log (omitting uninformative lines):
...
Found…
cw150 updated
4 years ago
-
After following the installation guide for linux, executing `flatpak run org.adi.Scopy` opens the Scopy window but no device is detected. Even with `flatpak run --device=all org.adi.Scopy` it does not…
-
We have some PlutoSDR firmware that does the FFT inside the Pluto's FPGA, -- rather than transferring I/Q samples up it transfers FFT bins.
Is that something that might be useful? (It doubles the e…
rgetz updated
4 years ago
-
I encounter the problem when build firmware with the following message:
u-boot-xlnx/tools/mkimage: Can't read build/pluto.itb.tmp: Invalid argument
11:26:05 Build Finished (took 1s.63ms)
Invoking …
-
A few people have asked to save the ssh host host key to the flash (via `fw_setenv`) so that it is recovered, and which allows it not to be so annoying when plugging in/out devices...
rgetz updated
4 years ago
-
I have a problem with FMComms2/3/4 or PlutoSDR blocks in GNU Radio.
I have GNU Radio 3.8 and PlutoSDR connected via USB.
I am trying to run cyclic-sine_pluto.grc from gr-iio/iio-examples and I get…
-
Using Ubuntu 18.04
gnuradio installed with
sudo add-apt-repository ppa:mormj/gnuradio-releases
sudo apt-get update
sudo apt-get install gnuradio=3.8.0.0~gnuradio~bionic-8
gr-iio built w…
-
As discussed in #388 we aren't doing something right in the avahi/bonjour code - since many devices (non-IIO) respond back when looking on the network.
rgetz updated
4 years ago
-
Hi:
As you will see in error captured from the Python shell, I'm running 3.7.3 on a 64 bit Windows 7 computer. I installed libm2k for windows using libm2k-system-setup.exe from this Appveyor build:
…
-
Im running PiSDR 3.0 on Pi4. SDRAngel works with my PlutoSDR, but not GNURadio. When I add the PlutoSDR Sink or Source Blocks to my flow graph and press execute I get the following error:
/*-------…