-
Hello, I came here from here, let me know if it's the wrong spot:
https://forum.airgradient.com/t/native-airgradient-integration-with-homeassistant/2125
I upgraded the firmware on my AirGradient a…
-
First boot of a device after clean install of the 3.1.1 firmware. This was while I was connecting to the hotspot on my phone and configuring my Wifi information.
Note the `request handler not foun…
-
First of all, thanks for everyone's efforts around this sketch.
The issue I've encountered is that while things seem to be working fine for a while, at some point the device stops responding to net…
-
There are quite complex configuration options for specific sensor modules that can be setup on the AirGradient dashboard.
To keep things simple now and avoid having to deal with configuration conf…
-
So the indoor device gives us a flat response. The Airgradient OpenAir on the other hand, returns a JSON object with channels:
```json
{
"wifi": -52,
"serialno": "84fce60bec38",
"chan…
-
Not sure what of the following are what in terms of features - eg. which of the below are Open Air Outdoor vs Indoor and what is the model name of each??
```
8PSL
8PSLM
8PSL-DE…
-
Validation output
```console
INFO ESPHome 2024.7.1
INFO Reading configuration /config/esphome/living-room-airgradient.yaml...
WARNING Found 'it.printf(0, 0, id(open_sans_14), "ID:");
it.printf(12…
bmos updated
4 months ago
-
From our forum:
https://forum.airgradient.com/t/pms5003-cf-1-or-cf-atm-data/2298/6
Hi [@Achim_AirGradient](https://forum.airgradient.com/u/achim_airgradient) just a note here - as I was looking fo…
-
### The problem
I have a O-1PST outdoor sensor running the unified firmware version 3.1.3. The integration works fine, apart from one small issue that causes more problems with automations and data a…
-
Hi,
Since the update my AG Pro (sht30) keeps resetting every ~2 minutes with the ESPHome logs being:
```
...
[23:12:17][D][pmsx003:234]: Got PM1.0 Concentration: 8 µg/m^3, PM2.5 Concentration …