-
Hi,
DIXPRS appears to implement a TX igate. When gating from APRS-IS to RF the packet path of the 3rd-party packet, after the '}', needs to be modified so that it has a ',TCPIP,IGATECALL*>' path, i…
-
https://groups.io/g/direwolf/topic/88846731#6175
I've noticed that APRS packets received but had FX.25 corrections made are not being digi'd unless at least one of the decoders successfully decod…
-
An empty `"path": ""` instead of `"path": "WIDE1-1"` in `tracker.json` works perfectly fine if you are only interested in putting your beacon on the map. This saves 7 LoRa Bytes, which increases the c…
-
GREENCUBE is decoded successfully to get the frames in hex. But the hex values do not match up with what is expected according to the GREENCUBE team. When looking at the 105byte length telemetry frame…
-
In the next release will it be possible to have a TCP connection and a Bluetooth TNC connection simultaneously? Allowing APRSdroid to be an iGate?
I have been using APRSdroid while mobile on a HTC sen…
-
Integration of the traditional iGate Feature from Peterus.
So that we only need one Firmware for the Boards.
Config for the iGates from the Web-Interface.
-
Hi,
is this software still under development/support?
I have got the following build error:
```
gcc -g -O2 -pthread -DAPRXVERSION="\"2.9.0-28-g13c6e79\"" -DVARRUN="\"/var/run\"" -DVARLOG="…
-
Configured all values in U.Info, set both MSG and GPS channels and radio is sending the APRS frames which are decoded correctly by direwolf :+1:
Minor stuff that could be fixed:
- MySSID and Di…
sq2mo updated
6 months ago
-
Aprx contains no behavior for APRS Messaging. At a minimum, aprx should reject all messages directed at any of its aprx_interfaces. Further actions based on APRS Messages (forward as email, send to sy…
-
Now Raspbian GNU/Linux 9 (stretch) 4.19.42-v7+ isn’t playing Direwolf 1.5’s packets in their entirety, only a split second (0.09 seconds according to Audacity) of flat tone, through the RPi 3B+ intern…