-
Hello. Due to wrong color pins in Magic Home RGBW example i had to reflash device as it didn't enter setup mode. Now when i try to readd accessory after flashing, Home app says that accessory already …
-
### PROBLEM DESCRIPTION
No WIFI AP on Sonoff DUAL R3.
### REQUESTED INFORMATION
- [X] Read the [Contributing Guide and Policy](https://github.com/arendst/Tasmota/blob/development/CONTRIBU…
xoniq updated
2 years ago
-
A JSON tested collection.
Please add your.
FORMAT:
- Device
- Accessory description
- Json
GPL71 updated
2 years ago
-
Attached log below, I can't figure this one out I'm compiling on case-sensitive volume on MacOS Mojave getting same error all the time. All the packages are installed with brew.
```make STANDALONE=…
-
I just received two Sonoff Basic R3 modules, but I could not find any info on the pinout for flashing.
As I just successfully flashed both modules with the latest Tasmota version, I thought I would s…
-
How to flash Sonoff mini with DIY tool over wifi with ESP homekit? howto flash all 3 bin files? haaboot.bin, rboot.bin and blank_config.bin.
Or is there any .BIN file that combines all 3?
Any video …
-
Hey gibt es eine Möglichkeit auch den Öffnungsstand vom magnetsensor vom Garagentoröffner abzufragen?
Liebe Grüße
Danke für deine Arbeit
-
Hello and congratulations for your excellent work that interests me a lot for my IoT projects. My first project is to command the Gate from with a Sonoff Basic R2. I made a switch and I drive my Gate …
-
I was wondering if you could provide some insight on what the reasoning is for requiring an app.bin middleware firmware? I'm assuming it might have just been the first thing you tried, or you preferr…
-
Hi,
is there the possibility to add a last will functionality? I.e., if a device disconnects from an MQTT broker, the broker can publish a [last will](https://www.hivemq.com/blog/mqtt-essentials-pa…