-
Since I have unsuccessfully flashed the display, it is no longer shown as an usb device neither on a Mac laptop nor a raspberry pi 4.
Also, I cannot find a button named „boot“ which seems to be n…
-
Running FW 3.2.2 on a lilygo-t-display-s3. Works fine via USB, but under battery power LCD is powered off. GPIO15 must be set HIGH for LCD to turn on when powered only by battery.
Also, battery v…
-
```
PIO Core Call Error:
The following files/directories have been created in C:\src\simplehacks\web_ble2\web_hid2
include - Put project header files here
lib - Put project specific (private) li…
-
First of all, thank you for the amazing idea and putting it online
I tried running this on two different Lilygo T Display S3 but unfortunately it crashes after a few milliseconds and the microcontr…
-
Hello, I am running this on a LilyGo-T-Display-S3 and after a few minutes I get red text at bottom of screen saying "Connection refused"
Is this an issue with wi-fi connection, or maybe flightradar24…
-
Hi, just got my S3-Long. I followed all the instructions for the Arduino IDE Quick Start. As the instructions are not that clear,
(step 2) after installing the Arduino ESP32 (is the Arduino_ESP32_…
-
Thank you so much for the demo.
In the process of testing I found a strange behavior.
It seems that the X coordinate is not taken into account when calculating hits to buttons, so they are triggered…
-
How can I get this working in EspHome/Homeassistant?
-
I finally managed to build and upload your print demo example, but the Esp32-S3 does not connect to MX09 cat printer.
I used the setup instructions from: [(https://github.com/teastainGit/LilyGO-T-d…
-
IDE: Arduino IDE 1.8
Hardware: ESP32-S3-Lilygo-T-Display-S3
When compiling the example sketch "start.ino", getting error message,
"
In file included from /Users/~/Documents/Arduino/Tuya_Test_ESP…