-
Brownout detector was triggered
ets Jun 8 2016 00:22:57
rst:0xc (SW_CPU_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
configsip: 0, SPIWP:0xee
clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:…
-
not per se an issue just more an information for ppl want to use MH-ET LIVE D1 mini.
Took me a couple of nights to figure it out and to get it to work. The general pin layout is the same but there is…
-
I am using / testing BBQKees Gateway Premium II since 2 weeks.
My Heating System: Buderus KB192i Boiler with integrated IP, RC310 thermostat and MM100 mixer.
I tried different versions of EMS-ESP: …
tp1de updated
3 years ago
-
@proddy
Hi Paul, I recognized that my ESP32 gateway is rebooting approx. after 11-12 hours. I can't see any reason why. Free memory is not the problem. Could it be that having http get requests per …
tp1de updated
3 years ago
-
not per se an issue just more an information for ppl want to use MH-ET LIVE D1 mini.
Took me a couple of nights to figure it out and to get it to work. The general pin layout is the same but there is…
-
Should i make a new issue for the esp32-mqtt-disconnects? I have no idea what causes it. What i know about this issue:
- it's only on ESP32
- mqtt disconnects every 12032 seconds from boot, reason T…
-
Hi,
Arduino, libraries and ESP32 are up to date.
My ESP32 version -> https://components101.com/microcontrollers/esp32-devkitc
I use setup file -> Setup14_ILI9341_Parallel.h
LCD pins are soldered…
-
I'm having problems getting a SD card to work over SPI with the new MicroPython SD card support introduced in 8e3af7d & 6077d17 by @dpgeorge and @nickovs
The SD card and hardware work fine when usi…
-
**Describe the bug**
alpha5 cannot see any of the preinstalled boards that are visible in alpha4
**To Reproduce**
1. run alpha5
2. check installed boards
**Expected behavior**
All preinstall…
-
heya im using known good hardware, with pullups on the SD CS line, no level shifters, PCB traces not jumpers - but getting 'flakiness' on init/mount
```
[E][sd_diskio.cpp:99] sdSelectCard(): timeo…