-
I have connected one CRCA-00/04 thermostat and one CHAZ-01/01 actuator (connected to a Dimplex oven) for testing. The thermostat works great, but for the CHAZ-01/01 I'm only getting signal strength an…
-
Devices are imported from file and all switches and dimmers seems to work fine. However, all pushbuttons does not have any state that show if the button was pressed. It only show the battery level for…
-
**The xComfort addon does send redback numbers for which level the dimmer is set to. But have stopped to do so when turned to "off". 0 is not sent over mqtt.**
example:
When using debug in node r…
-
Hi
I have a Shutter Actuator with Security (CJAU-01/02) installed that is controlling an awning
The problem is that the up/down/stop buttons is not behaving as i would expect
The down and stop …
-
When programing Xcomfort in MRF, you can programe switch actions. (Short press up, long press up, short press down, long press down) in the actuators setup.
When creating grups/senarios in MRF (Sever…
-
### The problem
The [xComfort Bridge Integration](https://github.com/jankrib/ha-xcomfort-bridge) fails to load after update from v2022.6.7 to v2022.7.0 with the following error log entry:
`Logger: h…
-
Hi! Being "stuck" with a legacy xComfort solution I can't swap out unless I want to tear down multiple walls, this is a great solution for me. I was able to install the integration, and it reports bac…
-
After updating HA from v2022.6.7 to v2022.7.0 the xComfort Bridge Integration failed to load with the following error message:
`Logger: homeassistant.setup
Source: setup.py:162
First occurred: 10:2…
-
This field is useful for those who care about unique ids. It should be easy to skip, though. And the way it's described in the readme doesn't make sense.
-
Hi,
I was happy to see there was a xcomfort integration, so first of all thanks for putting in the effort to build one. But after installing it it seems to timeout finding any light, or devices for…