-
Hello.
I am trying to use an Sx1262 module (Ebyte E22900M20S) + ESP32. There is an external circuit to control the RF switch using the module's external pin DIO2, but this pin never changes its sta…
-
After “eBitcoin” being the first “E” coin on EtherDelta, a bunch of other “E” tokens were being listed like crazy on EtherDelta, some beings scams because they were there just for the pump and dump. H…
-
As already mentioned [here](https://github.com/thelsing/knx/issues/81#issuecomment-683979131) it would be nice to support the CC1310 as new platform in the stack.
@mjm987
You stated here that you …
-
Hello Gerhard,
enabled driver with `#define USE_IBEACON` and used this module http://www.ebyte.com/en/product-view-news.aspx?id=248
[E72-2G4M02S2B_Usermanual_v1.1.pdf](https://github.com/gemu2015/…
-
Hi
This is not really an issue, but I find the use of RadioHead a bit of overkill for such a simple protocol, and I'm also concerned that potentially RadioHead adds additional data to the start and…
-
Dear
I am using the NRF52832, using the following prj
```
##########
# for GPIO
##########
CONFIG_GPIO=y
##########
# for BLE
##########
CONFIG_BT=y
CONFIG_SENSOR=y
##########
# f…
-
I see in the docs there is a way to adjust the power level for transmit, and the RX gain for receive.
I am getting incredibly poor LQI as reported by a Xbee mapping my network -- all routers connec…
-
http://www.ti.com/product/cc1352p?HQS=epd-mcu-simp-cc1352p_zigbee-dspbs-pf-epd_wcsimpsub1ms_all_null_fp-wwe&DCM=yes&dclid=CNeY7_f7tOACFdjNsgodUXsDGw
I got this ad in my webbrowser probably some coo…
-
I wish to always use my unit in 'normal' mode (M1 & M0 both LOW). Is there an option to assign -1 to these pins during creation of the EBYTE object, similar to that provided for the Aux pin? Both M0 &…
-
Hello! The same problem like closed issues on ESP32 (basic example for esp32).
I made sure the transmitter was working. Data from HackRF:
![image](https://user-images.githubusercontent.com/6287944/7…