-
Tried to build it for BeagleBoneBlack which has Cortex A8 and NEON support.
Currently https://github.com/jgaeddert/liquid-dsp/blob/master/configure.ac has such hardcoded configuration for ARM:
```
a…
-
Hi,
I try to connect the matlab windows with linux using the library libiio, I use in my project a zedboard execute Linux connected to AD9361.
At the beginning he show that he "cannot connect to iiod…
-
I'm having an issue with buffer to buffer transfer rates. When simply looping back through the FPGA I'm observing ~450 MB/s transfer rates for CPU -> FPGA -> CPU using the xdma-demo.c with minor alter…
-
While booting up pulpino on the zedboard fpga, it stalls at "Sending DHCP and RARP requests" even though the ethernet cord is plugged in. Any idea why the packets aren't being sent?
-
```
++ adb -s 10.79.3.245:5555 shell 'cd /mnt/sdcard/tmp/; rm -f /mnt/sdcard/tmp/exit.status; /mnt/sdcard/timelimit -t 180 ./android.exe ; echo $? > /mnt/sdcard/tmp/exit.status'
Failed to open /dev/po…
-
I wrote a c code and compiled it with riscv64-unknown-elf-gcc and ran it on the rocket chip instantiated on a zedboard using the proxy kernel and front end server(./fesvr-zynq pk ).
The same binary w…
-
I have followed 1) Quick Instructions for Zybo and board boots to ARM-Linux. But neither Hello nor RISCV-Linux works for me. There is no output but fesvr-zynq can be interrupted with ^C.
```
make fet…
-
I am following the procedure of "Building aws" in https://github.com/yhmtmt/aws.
The build environment is petalinux-2014.2. (petalinux-build works fine)
After cloning the following repositories,
> g…
-
Hello, from the version yesterday, remote operation doesn't work.
The first line of the sample filter worked, however, it doesn't start. I saw some modification on rcmd recent days.
Could you give me…
-
Hello Pavel,
I am trying to understand your FPGA block diagram and I have some questions.
1) What does the LFSR that drives the complex mixer control channel do?
2) Why do you have 3 FIR stages insid…
G4GUO updated
8 years ago