-
It looks like you are using the AT command set in the ESP8266 and send commands from the PIC??
I'm not sure why you are not just directly programming the ESP8266 and then could do away with the PC
T…
-
There are two things that don't seem to be implemented correctly in this library.
1. the delayed transmit is delayed by dt from an arbitrary point in time
2. the delayed transmit should be delayed…
-
I'm curious if anyone has tested this code on an ESP8266 or ESP32 connected to a DWM1000 module. The extra processing power of these modules combined with Wi-Fi (and Bluetooth on the ESP32) might make…
-
Hi,
I can't believe this without connecting IRQ pin I'm getting following data....
Device ID: DECA - model: 1, version: 3, revision: 0
Unique ID: FF:FF:FF:FF:00:00:00:00
Network ID & Device Add…
-
I want to thank you to avail this big effort to everyone,
I just need to understand how synchronization between anchors is working in your code?
and i do not know how to connect anchors together to…
-
Ok, so I am finally getting 3 ranges value from three anchors on the tag. I can easily use these to do Trilateration, But my main controller should not be connected to the tag, since I want to track a…
-
i am trying to add sleep just like in the example of tdoa_tag
/* Enter sleep */
uwb_phy_forcetrxoff(udev);
uwb_phy_rx_reset(udev);
uwb_sleep_config(udev);
uwb_enter_sleep(udev);…
-
The dwm1000 modules only works within a range of 10 meters. That is very short because the dwm1000 product brief and the dw1000 datasheet says that it will work far over 100 meter outside and 20-50 me…
-
Hello Guys, I am having some trouble when running both the Two Ranging Codes (Initiator and Responder) and also with the 2-D Main Anchor and Tag Implementation codes. I am new to this and want to repl…
-
Hi,
My apologies for my english.
I am planning to buy two or three DWM1000 modules and I have a few questions before buying it.
For each question , the method I want to use is a two way ranging…