-
Seismic alerts in Mexico City follow the ANSI/CTA-2009-B R-2016 standard and are triggerd by a lot of sensors installed all around the west coast of Mexico, they measure the activity of 3 tectonic pla…
-
Hello, the T-Echo firmware by cfr34k (https://github.com/cfr34k/t-echo-lora-aprs) encodes the digi path via the destination field.
For example `APLETK-1` should translate to digipeating the same a…
-
Fresh SD with Raspbian Bulls Eye (32bit), git clone the repository. Configure went ok... However when i execute make, i get this error:
`/usr/bin/ld: timercmp.o:/home/pa0esh/aprx/aprx.h:44: multipl…
-
Greetings,
Would it be possible to add a bit regenerator/packet repeater function? Many years ago, TAPR introduced a hardware version which went into a standard TNC2, which when attached to approp…
-
I am still new to APRS, and have been a ham radio Technician for 5 years. I open this issue as a long-term discussion on the pros and cons of such an integration and whether it meets the goals of the …
-
Unable to turn off OLED display by inhibit "Always On"
I suspect something else may be keeping it alive
The intended use is a solar powered i-gate that will only digipeat to other locations with WiF…
-
hello I have a problem with a Light APRS (+WSPR) tracker 1.0 I followed the procedure to the letter I connected the two antennas with sma sockets I compiled and modified the settings that I needed I h…
-
Hello,
I updated to latest version "2024.04.09" and noticed a couple of issue in the configuration.
I updated building and loading the firmware using VSC, then loaded the filesystem.
I had to corre…
-
Hello, could you help me register these parameters?
-Device 1
tocall: PSKAPS
vendor: Jose, XE3JAC
model: ESP-32 LoRa iGate
class: igate
os: Embedded
contact: xe3jac@gmail.co…
-
Some of my packets don't get decoded because of the above error. Or they do get decoded, but are missing parts. The larger the packet, the higher the chance of an error. I'm using Alsa with a SoundBla…
ghost updated
2 years ago