-
Hi,
I'm testing the DWM1000 with an arduino Due but it doesn't work.
I think because of the port mapping...
Can any one help me please?.
Thanks !
-
There are currently a couple of open PRs for new radio drivers or reworks of existing drivers.
These PRs are often quite big, so let's share the work and try to review each other's drivers.
- at…
-
Hello everyone,
I achieve to make Pro Mini 3.3V boards communicate and ranging between them quite easily. But I am facing an issue to do the same with Teensy 3.2 boards (which are also 3.3V).
I …
-
If power is removed and re-applied within a period of 60 seconds, the TriPoint module will become unresponsive due to the Decawave chip not responding to any commands. This may be un-fixable with the…
-
Hello Everyone,
Some of you can get some advance in one of these critical topics for this Library:
*Wired Clock Synchronization
*Wireless Clock synchronization
*TDoA System
*Multiple TAG Support wit…
-
Hi,
i tried you library out and can't get any RX data.
I checked if the interrupt works and it does.
I tried all the examples and have the same result.
I also tried arduino-dw1000 and the exampl…
schef updated
5 years ago
-
I tried using this library with the DWM1000 module, however the Tag and Anchor programs did not seem to work upon upload: no communication occurred between the tag and anchor. I know for sure that the…
-
Hi @thotro,
I want to try to implement the MAC layer according to the IEEE 802.15.4 standard.
I don't really understand the current frame format for a message.
When we send a message, we call the setD…
-
I want to make continues ranging to make this:
ı changed
PRINTLN(F(" Ranging all anchors. Return to IDLE"));
updateState(STATE_IDLE);
to
PRINTLN(F(" Ranging all anchors. Return to IDL…
-
Hello. Has anyone fully solved the issue of adding multiple tags? I've looked into discussions among the question titles here, but I couldn't find a precise and clear solution. Has anyone been able to…