-
### Installation specifics
* **Heating type:** Vitodens 200 i think
* **Protocol:** unknown
* **Board:** nothing yet
* **Hardware:**
Viessmann 222f boiler.
We have the above unit and I u…
-
Hi,
I was successful creating multiple publish and subscriber ESPs using the lib. However, when running the code for several days, the ESP seems to hang. I wonder if anyone was successful running MQT…
-
### Checklist
- [X ] The title of this issue is "to the point" and descriptive.
- [ X] This issue describes what is happening.
- [ X] This issue describes what components are affected (e.g. name of…
-
### PROBLEM DESCRIPTION
In these four files #ifdef EPS8266 is used instead of #ifdef ESP8266 - which e.g. broke the MFRC522 functionality between 12.5 and 13.x:
- tasmota/tasmota_xdrv_driver/xdr…
-
When using the library to send packets from one ESP8266 with an RFM98 to another, It is possible to transmit a packet more than once per second, but not possible to receive the packets without CRC err…
-
I have a PN532 (I2C) connected on a NodeMCU (ESP8266) Everything was working fine. The NFC reader was working.
But as soon as I changed an unused pin GPIO boot state: mode GPIO-13 (D7) to output low …
-
Thanks for this project! I don't have an Aquarea yet, but am considering it, and one of the factors is the possibility to control it programmatically.
Do you happen to have done more reverse engine…
ariep updated
2 weeks ago
-
First of all thanks a lot for making TasmoAdmin!
Iam very happy with the easy interface to control and find my devices!! Keep up the good work!
Is it possible to find also other devices? In Tasmo…
-
### Platform
ESP32
### Assembly
the DTU was already assembled
### nRF24L01+ Module
nRF24L01+ plus
### Antenna
circuit board
### Power Stabilization
Elko (~100uF)
### Connection picture
- [ …
-