-
possibly will give better results too rather than just using the accelerometer.
-
Is there a chance for this to get ported to ryujinx?
-
I am writing a software for a model rocket attitude control.
Because of excessive acceleration I can not use an accelerometer and must rely almost exclusively to the Gyroscope data.
I looked at yo…
-
### Is there an existing feature request for this?
- [X] I have searched the existing requests
### Description
Number of devices has a lot of noise on the gyro data. Using a low pass filter h…
-
In the documentation Appendix a: Sensor DATA EV3 Gyro Sensor writes:
Commands:
This sensor does not support commands.
This is not true , the EV3-G programming allows the Gyro the be reset.
G…
-
Drill Dozer, gba player mode Pokemon Pinball etc 0.93 windows version rumble doesn't work
but 0.92 rumble work
-
What is real brand of chip gyro in LEGO 45505 EV3 Gyro Sensor? Lego EV3 HDK (Appendix 8) says: ISZ-655 (https://www.lego.com/r/www/r/mindstorms/-/media/franchises/mindstorms%202014/downloads/firmware%…
-
**Question**
Are there more known information regarding the pseudo-commands that can be sent to the EV3 gyro?
**Background Information**
This is driven by my curiosity, (hopefully) no XY proble…
-
I am working on an application where it is critical to be sure that the data received are valid / correct, otherwise some real world hardware will do bad stuff. If I do not miss something, I think tha…
-
I want to read FIFO continuously. So I copied calibrateMPU6050 in a new function and in the loop I wait for 80 msec and then read fifo_count but I always one data packet.
void setup(){
......
uint8…