-
I was building this for my SteamDeck and noticed that during compiling, it was building things like drivers for Wifi Chipsets the Steamdeck doesn't have, as well as things like Nouveau.
Would it ma…
-
As discussed on ##linux-surface, hardware buttons on some Surfaces are not working. Reloading the button module works post-boot:
```
sudo modprobe -r soc_button_array
sudo modprobe soc_button_array…
-
**Describe the project you want to add with tech stack**
Arduino Code for **Digital Clock**, **3 LEDs Pattern**, **Keypad Door Lock** which could run on Virtual Arduino Simulator **TinkerCad** also…
-
**Describe the bug**
The wifi device doesn't appear with `ip a` command.
Failed to run INIT ucode: -110
`dmesg |grep iwlwifi` gives:
```
[ 4.150315] iwlwifi 0000:00:0b.0: can't derive rout…
-
### Troubleshooting checklist
- [x] I read the README (on master) thoroughly
- [x] I ran the MAX30100_Tester and I'm going to paste the output down below
- [x] I filled in all the details of my s…
-
Hello, a final problem.
I have several sensors connected to my Node MCU, including the MAX30100 and a DS18B20. The problem is that they work at different speeds, this generates a conflict with the …
-
- [x] I read the README (on master) thoroughly
- [x] I ran the MAX30100_Tester and I'm going to paste the output down below
- [x] I filled in all the details of my setup down below
Hello friends …
-
ets Jan 8 2013,rst cause:4, boot mode:(3,6)
wdt reset
load 0x4010f000, len 3460, room 16
tail 4
chksum 0xcc
load 0x3fff20b8, len 40, room 4
tail 4
chksum 0xc9
csum 0xc9
v0006bc70
~ld
…
-
```
rauc install http://10.0.0.10/bundles/update.raucb
installing
0% Installing
0% Determining slot states
20% Determining slot states done.
20% Checking bundle
20% Verifying signature
…
-
I am writing a Javascript app to display PPG from the Polar Verity Sense simultaneously with ACC and ECG data from the H10 - I am not using the Polar API/SDK but querying the UUIDs using the Web Bluet…