-
Hi, I'm trying to figure out QPSI support for the 1.8v Winbond W25Q128JW flash chip. I picked this chip thinking it had the same command set/API as the already-supported 3.3v W25Q128JV chip, but I wa…
-
Used Device: ChameleonMini RevG
Used Firmware: DESFire-only Firmware Build 25e6545f9dd3cbf64ca6745db26663204684587a
ATS as reported by proxmark3:
[+] ATS: 06 75 77 81 02 80 [ F0 00 ]
Steps to …
-
An OEM access control system, in addition to simply controlling access, also allows you to perform a series of operations from the terminal (queries, etc.). To do this, the tag must be left on the rea…
-
As stated in the title, I have reason to believe that the processor pin that drives tacho output has changed from revF to revG
related to #143
-
revF VR+Hall circuit seems to work quite well, only needing a 1nf cap Net-D57 to GND as shown https://github.com/rusefi/alphax-4chan/issues/121#issuecomment-1509942883 here.
Why did the revG circui…
-
Hello everyone, I have copied the UID of my protected Mifare 1k card using Chameleon Rev G by emulating DID and extracting the keys with MFKey32, it finds all the keys within a few seconds. However, w…
-
Same physical unit as https://github.com/rusefi/alphax-4chan/issues/124
@ElDominio need to run this board as VR C2+C3
-
with D1 removed voltage is 9.9v
with R46 value lowered to 470 tach voltage 11.5v
-
So I bought one of these guys a long time ago in the summer, chameleon tiny pro with BT, problem being is that I believe I re-mapped the on button and somehow disabled BT function so I cannot turn it …
-
Hi,
i just cloned this repositoy and then uncomment:
CONFIG_SETTINGS += -DCONFIG_MF_DESFIRE_SUPPORT
in the Makefile in ChameleonMini/Firmware/Chameleon-Mini, and i run make without errors.
T…