-
## Severity:
SEV-3 | Stability or minor user impact
## Description:
Creators are unable to upload a smart wearable with different representations for male and female body shapes at the moment.
## Oper…
-
-
-
To realize the idea of doing a validation of `HDE` with icub robot, we need to provide the same kind of data from the `ICub` wearable device, as that of `Xsens Suit` wearable device. As discussed with…
-
**Is your feature request related to a problem? Please describe.**
The addition of new `IWear Logger` device is very handy in dumping wearable data form a wearable device to a `.mat` file.
If I am…
-
If we are going to introduce more wearable types ala meeting suggestions, we should establish some baseline concepts and classes for them.
Some are more obvious, eg:
* hats
* masks
* 'head accessori…
-
Create a wearable app, which can show the content of a note or a list of notes from a selected account/rootfolder/notebook/tag.
-
The push button schematic in our project is not consistent with the button from assembly. On the actual button, pins 1-4 are shorted and pins 2-3 are shorted. When the button is pressed, 1-4 shorts to…
-
We need the wider dimension of the PCB to exactly match the PMS5003 PM sensor. We'll need to shave off about 1-2mm, but check.
We also need to remove the corners of the PCB so screws can go through…
-
@fwild the https://codereality.net/ar-for-eu-book/chapter/wearableInteraction/ draft is based on your lecture. please, finish the chapter.