-
Poor scaling of the curve parameter _s_ in Modelica.Fluid.Interfaces.PartialLumpedVolume when portsData_height[i] = 0 causes problems for mode switch detection. Especially, when switching from the mod…
-
**Reported by beutlich on 18 Oct 2016 12:04 UTC**
Whereas there is one example model utilizing Memories.DLATRAM (in Examples.RAM) there is no such model for Memories.DLATROM in MSL or ModelicaTest.
-…
-
### Description
The solver fails to solve system at initialization. Problem is, that after some iterations an equation divides by zero.
The following below listed models have same issues:
```
Bui…
-
I was just starting to use Modelica res however it seems that something does not quite work as it should:
```
In [11]:
from modelicares import SimRes
sim = SimRes('test.mat')
sim.find('ramp.y')
----…
-
In #43, parsing models has been enabled. This is needed for BOPTEST.
There should be a flag when running the parser that sets the mode to CDL, in which case the check that is removed in https://githu…
-
-
**Reported by fcasella on 2 Jun 2008 22:00 UTC**
Develop example cases of realistic steam turbine systems, including bypass circuits and possibly start-up/shut-down operations.
----
Migrated-From: h…
-
### Description
The setup bar of a plot can be undocked by clicking on the dots on its left side. However, when changing from the "Plotting" view back to the "Modeling" view the setup bar is still …
-
Hi, I opened a new issue to follow up the issue that I was facing in my past post and the possiblity o someone checking the Machine library.
"_Originally posted by @perost in https://github.com/Ope…
-
**Modified by dietmarw on 28 Apr 2016 09:22 UTC**
This is a discussion regarding MCP-0011_CustomReductions:
* https://svn.modelica.org/projects/MCP/public/MCP-0011_CustomReductions/
It concerns call…