-
Hi folks,
i'm planning to flash this charger with the cheali-charger-Turnigy-A-6-10-200W_2.01-e10.3.12-20170311_atmega32.hex.hex
Unfortunately the flash and eeprom read outs are fake ones.
In the…
-
Hello and thank you for this great piece of software. I have grottserver running in a docker container, and the Growatt data logger device successfully registers to it on my LAN, and data is pushed to…
-
Subtask of #358
To be discussed with @wangyoucao577
// this two paragraphs will be placed in doc :)
`OASIS` stands for **O**ptimized Ch**a**rge **S**tation Select**i**on **S**ervice, which main…
-
So the Waterstone is similar to the Firestone in that it is a large rechargeable Fluid Container filled with Water. It was intended to be implemented alongside the Firestone but I could never come up …
-
### What happened?
Describe the bug
Using a tinkers' construct fabric port called hephaestus and the mod create: additions, some compat mods do not load correctly. When hovering over these broken …
-
Hi,
Thaks for the nice library you made.
I started to use pyrosm not a long time ago.
For my purposes, it is necessary to filter about 60 types of various tags. When I executed the test with a…
-
I bought a PiJuice Zero foer my Pi 4 and wired the necessairy pins (from here: [https://pinout.xyz/pinout/pijuice#](url)) up. I installed the gui as explained in your user guide using `sudo apt-get in…
-
Check for fault before booting. Fault register should be read twice to handle transient errors.
Loop if voltage low. Indicate charging or fault with LED. On kernel start, set amber LED.
Tony: For th…
-
```
To make powering the controller a little easier, would it be possible to add
two JST sockets to the PCB? That way two Lithium Ion batteries could be hooked
up.
Two 1000mAh batteries would give …
-
We really need a better solution than the rat's nest of cables we have now would precariously around the robot. What should we do?