-
Hi !
The new Busmaster version gives me some undefined references:
```
C:\Program Files (x86)\BUSMASTER_v2.6.4\SimulatedSystems\OBJ\libWrapper_CAN.a(Wrapper_Common.o):Wrapper_Common.cpp:(.text+0xcf)…
-
Hello,
I am attempting to use Busmaster to demonstrate vehicle communications for a kids engineering event. I want to use an Xbox controller, remapped to keypresses, to control routines in Busmaster…
-
If a simulated system is configured in BUSMASTER it has to be enabled after each BUSMASTER start. This means load dlls and enable the handles to be used. It would be usefull to save with the configura…
-
Using Peak driver with PLIN USB (one LIN channel) fails with error:
"Listing hardware interfaces failed."
There is a bug in the code. Enumerating channels on single channel PLIN device always fail…
-
- BUSMASTER v1.6.7 is installed on PC.
- ES592 is connected to PC.
- In BUSMASTER, I select "ETAS BOA" for Hardware Interface
- The Available CAN Hardware selection shows that there are 6 CAN ports.
-…
-
Hi !
When I set the busmaster baud rate to 500 kbps then no data is transmitting and no bus error. But when I set the baud rate at 1000 or 800 kbps in busmaster & in software then I am getting the bu…
-
Hello,
I have the idea that the conversion with extended frames goes wrong.
I have a DBC file which contains an extended ID (0x18EF20FF). When I read the DBC file myself, I see the value 256580…
-
Hi !
When I set the busmaster baud rate to 250kbps then the data is transmitting and no bus error. But when I set the baud rate at 500kbps in busmaster & in software then I am getting the bus error. S…
-
Can you give me list of hardware interfaces which are supported for LIN in BUSMASTER.
Because the list for hardware interfaces given on BUSMASTER site is only related to CAN .
is that possible to …
-
Hi,
I'm getting an error trying to compile my busmaster model. I've created my node with .cpp and .dbf files. When I try to compile, a dialog box appears as seen in the screenshot below.
![bus…