-
Hi,
I am trying to use the mpu9250 to get orientation and compass data. Its all good in my test setup but eventually I have to mount this in a plane and I don't think it will be easy to rotate the …
-
Using Phoenix tuner, run the calibration process on each robot's Pigeon IMU. This is needed for improved accuracy. See https://www.chiefdelphi.com/t/how-to-calibrate-compass-with-pigeonimu/374993/3
-
Hello htool,
I did the same with an BNO055 from Bosch. it works well. you can take a look here: https://github.com/BerndCirotzki/ESP32_Precision-9_compass_BNO055
- I saw you added the new PNG 130824…
-
Hi, I want to run mpu9250 in banana pi M3，I try to modify the mpu_9150.launch, as follow:
…
-
We need to help users understand bad vehicle builds in a simple, visual way:
- Bad compass calibrations
- Vibration issues
- Motor alignment issues (constant offsets between motors during hover)
…
-
At present the only fallback mechanisms in roslaunch are `` and `$(optenv name default)`, neither of which are particularly suitable to the circumstance where you want "include this file if it exists,…
-
Hi,
During preflight check we want to make sure that the compass is calibrated. We were previously using `DJICompassCalibrationState` to do this check but realized that this measurement is only wo…
-
_This issue was originally filed by @marcojakob_
---
The following W3C spec defines a "compassneedscalibration" event: http://w3c.github.io/deviceorientation/spec-source-orientation.html#c…
-
Dear M Jrowberg,
Thanks a lot for your MPU6050 library is the best one i have tried ; i have achieve a tilt compass on esp32 with couple mpu6050 and lsm303dlh.
It's work great about 3 degrees …
-
SONY Xperia XA1與 HTC m9 plus,能正常接收LBeacon訊號，但是羅盤功能異常，永遠無法指向指定方向，導致一直卡在羅盤校準畫面，導致無法導航。
SONY Xperia XA1 and HTC m9 plus can receive LBeacon signals normally, but the function of the compass is …