-
Recently I have added support for the LLCC68 module in DIY devices (#918).
This module can work with the current firmware to a limited extent since it does not support Spreading Factor 12 (13.4.5.2…
-
Hello, I have EByte E220-900T22D module connected to Arduino Uno. Link to module: https://www.ebyte.com/en/product-view-news.html?id=1212
I'm searching for a library to control my module. I will bu…
-
### Discussed in https://github.com/jgromes/RadioLib/discussions/495
Originally posted by **frogg1ven** March 21, 2022
Hi,
I'm working with lora E220, and trying to transmitt data, but after…
-
Hello. I have been trying to configure the sx1262 (ebyte E22-900) and esp32 module for several days, but I have a problem to configure the SPI pins. My questions are: Will the library work on ESP32-C3…
-
**Additional info (please complete):**
- MCU: ESP32
- Wireless module type: Ra01SC(LLCC68)
- IDE: PlatformIO
- Library version 5.0.0
**Describe the bug**
Hello. My module can't work while …
-
I'm running into an issue getting my radio to work. Using a simple example to transmit using the current RadioLib version works fine, i can even capture the signal on another device. Using the exact s…
-
ESP32-C3 is a cost-effective, RISC-V-based MCU with Wi-Fi and Bluetooth 5 (LE) connectivity for secure IoT applications. The ESP32-C3 is a chip recently released by Espressif
When I run the follow…
lybgo updated
2 years ago
-
Hi. I tried my lora module but it can't work. This is my first time using a Lora mudule, so I don't know much about it. The program seems stopped at "radio.begin()". I have read the status codes page …
-
I have connected LLCC68(Ra-01sc) module to Arduino UNO, but I have got different errors from SPI
1. Initializing ... failed, code -707 - if I set BUSY pin
2. [SX1262] Scanning channel for LoRa trans…
-
the new LLCC68 based Lora
Module is out, is it possible to add the support in the coming release?
thx
**IMPORTANT: Check the wiki**
Before submitting new issue, please check the [Wiki](https://githu…