-
Hi,
I have a modified cr10 with a mks tinybee motherboard. I want to use the original cr10 display but it doesn't seem to work. If I plug in the connector it flashes and makes clicking sounds. If I…
-
Hello,
i downloaded the firmware from https://github.com/makerbase-mks/MKS-H43/tree/main/DWIN_SET_For_H43/H43_Firmware_for_Malin
I followed the instructions:
- Copy "DWIN_SET" folder to TF c…
-
Hi, Can you drop here the source code of the released version Firmware V2.30_H35_2022_1223_N_ZX_001 in "https://github.com/makerbase-mks/MKS-DLC32/tree/main/firmware/TS35/Laser/Normal/Board_V2.0" ?
M…
-
Hi Makerbase,
How to change Jerk settings in Mks robin ?
Default jerk values are high. How to change it ? Lot people are facing this issue. Why you are not doing anything for this?
Simple code ch…
-
I am using the MKS TFT32 + WiFi module, Cura 4.4 + MKS wifi plugin. https://github.com/makerbase-mks/mks-wifi-plugin. Deleting files on the SD card does not work.
-
Can you also release the .hex file for the bootloader and complete the entire picture? Thanks again and hopefully the community will take this to the next level.
-
Hello @makerbase-mks
I made some changes on the cura plugin, one using the native snapshot function of cura (this makes Always perfect snapshot that fits perfectly the model without the grid and s…
-
Hi,
i have flashed ESP3D to my MKS WIFI
(Firmware: https://github.com/makerbase-mks/Mks-Robin-Nano-Marlin2.0-Firmware.git)
NANO V3 / TS35
#define MOTHERBOARD BOARD_MKS_ROBIN_NANO_V3
#define …
-
The SD file transfer does not work neither USB nor Wifi.
After starting the transfer, _"No firmware response detected for sd card action. Assuming success and continue"_ message appears and the tempe…
-
### Bug Description
- Use MKS SGEN_L V2 motherboard and use the latest version bug fix marlin
- Enable #define SDSUPPORT unable to access SD card from PC via USB
- Disable #define SDSUPP…