-
Hellooo!
So I **had** an issue for a while with the backlight flickering on my SPW - I wired everything according to the instructions, however on two separate (new) 3.2" LCD displays the backlight wo…
ghost updated
5 years ago
-
If I cold boot the device the display doesn't work - probably isn't initialized correctly. Then I log in using SSH and issue a reboot command the display starts working correctly (framebuffer device w…
-
The display is scrambled, as shown in the image below.Cpu is STM32ZET6.I use the HAL library hardware SPI to drive the screen. When I used the sample code from the screen provider, the screen displaye…
-
Received my I2C 16x2 LCD today.
Took some time to get it working, but for now I can see status of a device on the LCD, directly controlled with pimatic :)
https://www.youtube.com/watch?v=t4Nu4YMaxwk
-
I added two units.
lcddriver.pas
LCD Display 2 x 16 - I2c
GpioButons.pas
GPIO input keyboard,
Measure how long a button is pressed
Press and LongPress
Test to Orange pi zero
https://gith…
-
I focused several issues and actually trying to figure them out.
My system:
All steppers drivers are TMC2130 (SPI)
2 Z-Axis
SDCARD Support
Now I´m focusing the following Issues:
When setti…
-
Hi,
I'm very new to the Raspberry Pi ecosystem. I've been trying to make a Raspberry Pi Pico totp generator and have gotten to the point of displaying a totp code. Since totp is built around SHA1 b…
-
https://forums.bunsenlabs.org/viewtopic.php?id=2214
Include a symlink and directory structure to the Faenza display lcd brightness icon.
-
### Did you test with a precompiled firmware?
Yes, and the problem still exists.
### Bug Description
Hello, I read through a post and then downloaded your firmware. I then entered the command C104 …
-
(copy of https://gist.github.com/vurtun/61b6dbf21ef060bcbbd8d1faa88350d9#gistcomment-2223201 )
## Path to full DPI and screen size independency
I'd like *V UI* to support the following case (whi…