-
Previously, you could run two SPI displays (I was able to run two 240x240 round displays) at the same time, so long that the CS and BL pins were different.
For reference, this was discussed on the …
-
I'm using ATmega a 3.5" touch screen and a Adafruit LoRa radio as a remote gate and kennel opener. It works like a charm so thank you for providing all the tools needed to make it happen.
But now I …
-
### Did you test with a precompiled firmware?
Yes, and the problem still exists.
### Bug Description
Hello, I read through a post and then downloaded your firmware. I then entered the command C104 …
-
HI LCD Wiki Team,
I applied the following on a working build Ubuntu 20.10 desktop installation:
git clone https://github.com/lcdwiki/LCD-show-ubuntu.git
chmod -R 755 LCD-show-ubuntu
cd LCD-sho…
-
Hi, I tested Stellaris-grlib-driver-Adafruit-TFT-ILI9325 library and work perfect. But, when I connect one sensor to I2C (sensor work fine without TFT library), he doesn't work.
I found the problem i…
-
This is for a kiosk I've put together for running a simple calendar.
#### What were you doing?
Installed FullPageOS on my SD Card.
Edited fullpageos-wpa-supplicant.txt for local network.
added a…
-
I am using a 3.5 inch LCD display that uses the GPIO pins, i noticed that assistantpi uses GPIO number 25 that is also used by the LCD. Is it possible to remove or change the GPIO number of the statu…
-
when i run my code:
import math
import os, sys
import sensor,image,lcd,time,network,socket
import KPU as kpu
from machine import UART
from Maix import GPIO
from fpioa_manager import fm, board…
-
I tried to run 3.5 inch LCD with driver ili9488 in 4-line SPI mode on fbtft overlay, but this driver (ili9488) does not support RGB565 mode in 4 line SPI. If driver init with RGB666, then i`m take wro…
-
Hello. Would it be possible to add an LCD readout to the Digispark pro that displays what profile is currently loaded, as well as which output setting is selected? I see lots of cheap 16x2 LCD display…