-
Hello,
I need help for my project.
I try your framebuffer but I have some trouble.
I use a Raspberry Pi zero wh and a ssd1351 OLED 128x128
It work but sometimes the updated zone is shifte…
ghost updated
3 years ago
-
Dear @Koenkk ,
After update raspbian buster to de last version the CC2652R becomes very slow. Orders sent from zigbee devices take up to 10 minutes to arrive to the zigbee2mqtt log .
I make a do…
-
Hi Aleksei
Thank your your work with this great library.
This is not a bug by definition but IMHO not the correct behavior.
Most of the 565 converters are using uint16 for output. The displ…
-
Hello
Thank you for producing the Luma library. I am having a problem with the welcome.py script.
My Hardware/ Software setup is as follows........
Hardware: Raspberry Pi 3B V1.2
OS: Raspbian…
-
I have a SSD1351 OLED display running on raspberry pi4, I ran my program with very low resolution and got FPS as high as 500+, but the display can't actually update that fast, it's not possible at 20 …
dh928 updated
3 years ago
-
### PROBLEM DESCRIPTION
Tasmota's _Display_ build (_tasmota-display.bin_) is supposed to support **TM1637** in release **9.3.1**. However, this is not happening if we configure just the **TM1637*…
-
Hi,
I need help compiling on my rpi 4 running raspbian 64bit. I try to compile the 64bit kernel.
I installed distcc, set path to `/usr/lib/distcc/:$PATH` in `/etc/profile/` so everything would us…
-
PIO Core Call Error: "Library Storage: C:\\Users\\Geoffysicist\\Projects\\PhysBrykCc\\.pio\\libdeps\\adafruit_feather_nrf52840_sense\r\nLibrary Manager: Adafruit Arcada Library @ 2.5.0 is already inst…
-
It's on the OLED C click, does this tie in with #11 at all?
-
Building on an RPiZero w/ a waveshare 1.44 hat, using:
cmake -DCMAKE_VERBOSE_MAKEFILE=ON -DWAVESHARE_ST7735S_HAT=ON -DGPIO_TFT_DATA_CONTROL=24 -DGPIO_TFT_RESET_PIN=25 -DSPI_BUS_CLOCK_DIVISOR=12 -D…